924# 

Silicone Microfiber Leather

Browse By Category

Specification

Our Silicone Microfiber Leather are specifically crafted for high-performance automotive interiors and steering wheels, delivering exceptional durability and comfort. For steering wheel applications, it boasts superb tensile strength and abrasion resistance, ensuring no cracking even with frequent gripping. Simultaneously, it features UV resistance and low-fogging performance to easily handle the intense sun exposure typical of dashboard areas, making it the ideal choice for both original equipment manufacturer (OEM) and aftermarket retrofitting.
  BASIC INFO
  PROJECT UNIT STANDARD RESULT
  Thickness mm   1.4±0.1
  Width cm   ≥137
  Weight gram/m2 DIN 2286 800±50
  Composition 39% silicone, 61% microfiber
  Flame retardant FMVSS302,EN71-2,CA117,GB8410,IMO A.652(16)8.2
  ENVIRONMENTAL PROTECTION
  PROJECT RESULT PROJECT RESULT
  Reach SVHC 219 PASS PAHS Free PASS
  EN71-3 PASS California Pro 65 Compliant PASS
  RoHS PASS Formaldehyde Free PASS
  Low VOC(VDA 278) PASS Odorless PASS
  PFAS Free PASS    
  Additional test reports are available upon request
  PROJECT RESULT PROJECT RESULT
  Abrasion Resistant
(Taber)
*** Acidic and Alkaline Artificial Perspiration
(GS94011; 9.9-7 und 9.9-8) after treatment with artificial sweat acidic and alkaline(GS94011; 9.9-7 und 9.9-8)
***
  Sticky Slip Test *** Tear Strength ***
  Tensile Strength *** Elogation Rate ***
  Tensile strength after climatic cycle *** Tear strength, after climatic cycling ***
  Seam Strength *** Stitch Tear Resistance (L+T) ***
  Color Fastness to Abrasion *** Nach (500 h/100 °C) trocken 100 cycles ***
  Sonnencreme(GS 94011-9.11-1) 100 cycles *** Handcreme(GS 94011-9.11-2) 100 cycles ***
  Isopropanol 50 % Vol.(GS 94011-9.9-10) 25 cycles *** Auto Innenreiniger(GS 94011-9.10-6) 25 cycles ***
  DEET 100%, 0,4 ml(CAS 134-62-3) 10 cycles *** Naptha(CAS 64742-49-0) 10 cycles ***
  Ethanol(GS 94011- 9.9-11 or see VDA 230-221 94-96%) 10 cycles *** Fogging ***
  Odor *** Hydrolysis Resistance ***
  10% NaOH Aging Test *** Heat resistance ***
  Anti-UV *** Color Fastness To Light ***
  Salt fog Resistance *** Color Fastness to Perspiration ***
  Flex Resistance(Room Temperature ) *** Flex Resistance(Low Temperature ) ***
  Cyclic Damp Heat Test *** Antibacterial & Mildew Proof ***

CARE + MAINTENANCE GUIDE

Do not store in long-term wet places. This will accelerate the aging of the leather.
It can not be placed in direct sunlight for a long time.
If any stain is found, please clean it in time. The longer the time, the more difficult it is to clean the stain.
Do not soak the leather.

Application

From comfortable seats and wear-resistant door panels to steering wheels requiring an excellent grip, Silicone Microfiber Leather is everywhere, adorning original equipment manufacturer (OEM) and aftermarket retrofitting automotive interiors with its superior durability, anti-UV properties, and leather-like feel. Not only is it an ideal material balancing fashion and toughness, but it is also key to enhancing the driving experience.
Car interior
seat cushion
car mat
steeling wheel

Automotive Interior Material Certificate

Laboratory

Caiwing is a marine vinyl fabric manufacturers, has a complete team and management system in quality control. All testing operations are carried out in strict accordance with ISO, ASTM, AATCC, SATRA, DIN, GB. In depth cooperation with major testing institutions (SGS, Intertek, etc.) and industry standard setting institutions, real-time learning and updating of self technology, to provide customers with the latest testing standards.

Production Workshop

Caiwing selects the global high-quality supply system to provide diversified products and services for customers in needs.
It has a complete testing center and application analysis team, which can develop and provide solutions for stamoid marine vinyl fabric according to the needs of different scenarios.

Shipping

GYM

CAIWING has a gym , which enables employees to have a rich and colorful spare time life after work. This can also stimulate employees' creativity and happiness and form a strong intemal cohesion.

How To Package

The thick paper tube avoid damage the leather in long-term transportation and reduce the tail wrinkles of the marine fabric vinyl.
Generally, the diameter is 4cm, and more diameters can be selected, such as 5cm, 6cm, etc.
Special Packing Can Be Negotiated

Inner-Packing

 

Inner Packing

 
Plastic film is used for inner packing to keep leather clean.
      

Outer-packaging

 

Outer Packaging

 
In order to better protect the leather, the outer packaging uses woven bags.
     

Shipping-mark

 

Shipping Mark

 
Each batch of products will paste the shipping mark according to the information provided by customers.

How To Clean

CARE + MAINTENANCE GUIDE

 
Do not store in long-term wet places. This will accelerate the aging of the leather.
It can not be placed in direct sunlight for a long time.
If any stain is found, please clean it in time. The longer the time, the more difficult it is to clean the stain.
Do not soak the leather
.

STAIN AND DISINFECTIENT RECOMMENDATIONS

 
Recommended Cleaning Solution: Mixture of Tide® or Oxiclean®
and warm water (1 teaspoon of soap for every 16 ounces water)
  • *For general spills, such as water, coffee, wine, sauce,milk etc.:

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     
  • *For tougher, non-liquid spills, such as mustard, mayonnaise, sunscreen, etc.

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     
  • *For Healthcare stains, such as Blood, Urine, Disinfectant, etc.:

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     
  • *STAIN AND DISINFECTIENT RECOMMENDATIONS CONTINUED

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     
CAIWING LEATHER is a manufacturer of ARTIFICIAL LEATHER with well-equipped testing facilities and strong technical force.
@ COPYRIGHT 2026 CAIWING ALL RIGHTS RESERVED.

About Us

Products

Quick Links