English
3156# Automotive Grade Vinyl

PVC Leather 

Browse By Category

Specification

70387719e8d4da4678aba4f2ad24739257ef4a1b26da53-hZtkm6_fw1200(1)
  BASIC INFO.
  PROJECT UNIT STANDARD RESULT
  Thickness mm   1.0±0.05
  Width cm   ≥137
  Weight gram/m² DIN 2286 670±70
  Composition Top Layer：100% PVC, Backing Cloth：100% polyester
  PHYSICAL PROPERTY
  Abrasion Resistant (Taber) cycle ASTM D4157-10 ≥2,000
  Abrasion Resistant (Mardindale) cycle ISO 5470-2 ≥100,000
  Sticky Slip Test μm VDA-230-206 ≤3
  Tear Strength N ISO 4674 MD≥35N CD≥35N
  Tensile Strength N ISO 1421 MD≥650N CD≥300N
  Elogation Rate % ISO 1421 MD≥180% CD≥280%
  Flame retardent FMVSS302,EN71-2,CA117,GB8410,IMO A.652(16)8.2
  ENVIRONMENTAL PROTECTION
  Reach SVHC 219 PASS PAHS Free PASS
  EN71-3 PASS California Pro 65 Compliant PASS
  RoHS PASS Formaldehyde Free PASS
  Low VOC PASS Odorless PASS
Automotive Grade Vinyl has become the material of choice for OEM automotive upholstery and aftermarket retrofitting due to its superior durability, anti-UV properties, and low-fogging performance. 
  Additional test reports are available upon request
  PROJECT RESULT PROJECT RESULT
  Tensile strength after
climatic cycle		 *** Tear strength, after
climatic cycling		 ***
  Coating adhesion N/5 cm *** Coating adhesion, after climatic cycling ***
  Seam Strength *** Color Fastness to Abrasion
-Dry/Wet		 ***
  Fogging *** Hydrolysis Resistance ***
  Heat resistance *** Anti-UV ***
  10% NaOH Aging Test ***
Alcohol Resistance
***
  Color Fastness To Light *** Color Fastness to Perspiration ***
 
Flex Resistance
(Room Temperature )		 *** Flex Resistance
(Low Temperature )		 ***
  Salt fog Resistance *** Antibacterial & Mildew Proof ***

CARE + MAINTENANCE GUIDE

Do not store in long-term wet places. This will accelerate the aging of the leather.
It can not be placed in direct sunlight for a long time.
If any stain is found, please clean it in time. The longer the time, the more difficult it is to clean the stain.
Do not soak the leather.

Application

From original equipment manufacturer (OEM) automotive upholstery to aftermarket retrofitting, automotive-grade vinyl is everywhere. It not only excels in Commercial Transit and recreational vehicles (RVs) but also fearlessly tackles the harsh challenges of Construction Equipment, and even the high-frequency friction of Bicycle & Motorcycle Saddles. This is a truly versatile and durable fabric!
OEM Automotive Upholstery
OEM Automotive Upholstery
Bicycle & Motorcycle Saddles
Bicycle & Motorcycle Saddles
Aftermarket Retrofitting
Aftermarket Retrofitting
Construction Equipment
Construction Equipment
Commercial Transit
Commercial Transit
RV
RVs
  • color-fastness

    Color Fastness
  • high-strength-physical-property

    High Strength Physical Property
  • eco-friendly-

    Eco-friendly
  • weathering-resistance

    Weathering Resistance
  • flame-resistance

    Flame Resistance
  • antibacterial-mouldproof

    Antibacterial Mouldproof
  • QUV-test

    QUV test

Certificate

Laboratory

 
Caiwing has a complete team and management system in quality control. All testing operations are carried out in strict accordance with ISO, ASTM, AATCC, SATRA, DIN, GB. In depth cooperation with major testing institutions (SGS, Intertek, etc.) and industry standard setting institutions, real-time learning and updating of self technology, to provide customers with the latest testing standards.
Laboratory1
Laboratory2
Laboratory3
Laboratory4
Laboratory5
Laboratory6

Production Workshop

Caiwing selects the global high-quality supply system to provide diversified products and services for customers in needs.
It has a complete testing center and application analysis team, which can develop and provide solutions for stamoid marine vinyl fabric according to the needs of different scenarios.
Production-workshop-1
Production-workshop-2
Production-workshop-3

Shipping

GYM

CAIWING has a gym , which enables employees to have a rich and colorful spare time life after work. This can also stimulate employees' creativity and happiness and form a strong intemal cohesion.

How To Package

The thick paper tube avoid damage the leather in long-term transportation and reduce the tail wrinkles of the leather.
Generally, the diameter is 4cm, and more diameters can be selected, such as 5cm, 6cm, etc.
Special Packing Can Be Negotiated

Inner-Packing

 

Inner Packing

 
Plastic film is used for inner packing to keep leather clean.
      

Outer-packaging

 

Outer Packaging

 
In order to better protect the leather, the outer packaging uses woven bags.
     

Shipping-mark

 

Shipping Mark

 
Each batch of products will paste the shipping mark according to the information provided by customers.

How To Clean

CARE + MAINTENANCE GUIDE

 
Do not store in long-term wet places. This will accelerate the aging of the leather.
It can not be placed in direct sunlight for a long time.
If any stain is found, please clean it in time. The longer the time, the more difficult it is to clean the stain.
Do not soak the leather.

STAIN AND DISINFECTIENT RECOMMENDATIONS

 
Recommended Cleaning Solution: Mixture of Tide® or Oxiclean®
and warm water (1 teaspoon of soap for every 16 ounces water)

  • *For general spills, such as water, coffee, wine, sauce,milk etc.:

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     

  • *For tougher, non-liquid spills, such as mustard, mayonnaise, sunscreen, etc.

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     

  • *For Healthcare stains, such as Blood, Urine, Disinfectant, etc.:

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     

  • *STAIN AND DISINFECTIENT RECOMMENDATIONS CONTINUED

    Wipe off the spills with napkin, and then use a clean cloth moistened with water to wipe in lines until it is clean, it is important to wipe the surface with a dry cloth or napkin to remove any remaining moisture.
    If the spill has evolved into a stain, a mixture of a mild soap, and 
    water (See recommendation above) should be used to remove the stain. Dampen a cloth with the mixture and gently work the stain in 
    a circular motion. Avoid rubbing the infected area aggressively, and be sure not to over saturate the fabric. After the stain is removed, dampen a cloth with water only and wipe away any excess soap left behind, and wipe the surface with a dry cloth to remove any remaining moisture.
     
公司logo(1)
sales@caiwing.cn
CAIWING LEATHER is a manufacturer of ARTIFICIAL LEATHER with well-equipped testing facilities and strong technical force.
@ COPYRIGHT 2026 CAIWING ALL RIGHTS RESERVED.

About Us

Products

Quick Links